Header Only - DO NOT REMOVE - Extreme Networks
Question

Config changed trap not being received


Userlevel 1
Hi All

I have Netsight and XOS 16.1.1. I have set an alarm in Netsight for the following trap

ExtremeNetworks cfgMgmtConfigChangeTrap .1.3.6.1.4.1.1916.1.42.10.0.2 Info
ExtremeNetworks cfgMgmtConfigSaveTrap .1.3.6.1.4.1.1916.1.42.10.0.1 Info

I this am however not receiving this trap. Is this supported?

4 replies

Can you do a TCP dump on NetSight to see if the trap is coming in?
Userlevel 1
David Coglianese wrote:

Can you do a TCP dump on NetSight to see if the trap is coming in?

Hi

I am getting traps to netsight just not those particular ones.
Userlevel 6
Are you getting any traps? If you are, you can try adding the two traps to your SNMP configuration. and see if that works for you.

configure snmpv3 add mib-view "defaultNotifyView" subtree 1.3.6.1.4.1.1916.1.42.10.0.2 type included
configure snmpv3 add mib-view "defaultNotifyView" subtree 1.3.6.1.4.1.1916.1.42.10.0.1 type included
Userlevel 1
Stephen Williams wrote:

Are you getting any traps? If you are, you can try adding the two traps to your SNMP configuration. and see if that works for you.

configure snmpv3 add mib-view "defaultNotifyView" subtree 1.3.6.1.4.1.1916.1.42.10.0.2 type included
configure snmpv3 add mib-view "defaultNotifyView" subtree 1.3.6.1.4.1.1916.1.42.10.0.1 type included

HI

Thanks for the info, That didn't work however.

Reply