EMC Tuning 8.03


Userlevel 1
As I can have through snmpv3 all the statistics of CPU, memory plus all the data of the statistics of the interfaces that are monitored.

I also need to fine tune all the EMC features for other vendor in this case I require on CISCO.

Thank you for your contribution and collaboration.

7 replies

Userlevel 4
Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B
Userlevel 1
Bharathiraja, Suresh wrote:

Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B

Hi Bharathiraja

I have some devices of differents vendor: Cisco Catalys, Cisco Nexus, Extreme, Avaya.

View Cisco Device


View Avaya Device



This is the configuration snmpv2 to Cisco "snmp-server group BCNOC v3 priv
snmp-server user snmpc0rr3v4l BCNOC v3 auth md5 snmpc0rr3v4l priv aes128 snmpc0rr3v4l"
Userlevel 6
Bharathiraja, Suresh wrote:

Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B

Avaya will be supported in 8.0.4 version. very soon!
We can do some cool staff with Vendor Profiles with version 8.0 already. We will be doing magic in version 8.1. stay tuned.
Userlevel 6
Bharathiraja, Suresh wrote:

Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B

in the meantime you can use flexviews
Userlevel 1
Bharathiraja, Suresh wrote:

Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B


Thanks for the data, but how can I receive EMC notifications from TRAPS and SYSLOG?
Userlevel 6
Bharathiraja, Suresh wrote:

Hi Jairo,

Could you explain what you have configured and what is not working on other vendor# ?

Thanks,
Suresh.B

Hi. EMC can receive syslog from any source. EMC can receive snmp traps from any source aswell. And SNMP informs also. Regarding traps and informs if you update MIBs then the OIDs will be translated also. With 8.0.4 events and alarms from Avaya should be “recognized” and incorporated. Z.
Userlevel 4
Hi Jairo,

Adding to previous comment please check below KB for more details about alarm and syslog.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-How-to-Configure-an-Alarm-to-Trig...

Thanks,
Suresh.B

Reply