Header Only - DO NOT REMOVE - Extreme Networks

Enforcing Netsight 6.3.184 Console trunk template on EXOS x440-g2 problem


Hi

I have a problem to execute port template (trunk port template) which was made with Netsight Console 6.3.184 on x440-g2 port (with EXOS)



What can cause the problem? How to make it work ?

please help
Regards
Marek

8 replies

Hi Marek,

I think the VLAN configuration with NetSight work only with EOS not with EXOS till now.

Regards Daniel
So your saying that i need to upgrade / move to Exreme Managment 7.0 (nac 7.0) and it will work ritght?
No, in Extreme Management it is the same. You can configure native VLANs via OneView or NetSight Console. But on trunks I mean you have to do it by hand on the shell.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-XOS-Vlan-Management

https://community.extremenetworks.com/extreme/topics/vlan-configuration-via-netsight-or-oneview-basi...
Daniel B wrote:

No, in Extreme Management it is the same. You can configure native VLANs via OneView or NetSight Console. But on trunks I mean you have to do it by hand on the shell.

https://gtacknowledge.extremenetworks.com/articles/How_To/Netsight-XOS-Vlan-Management

https://community.extremenetworks.com/extreme/topics/vlan-configuration-via-netsight-or-oneview-basi...



its kind of like that with extreme in this situation
Userlevel 4
Hello Marek,

vlan MIBs has been added in latest 22.1 release.
on the EXOS switch you need to enable the VLAN auto-move function.

configure vlan untagged-ports auto-move on

This feature is real new, and allow to change the untagged VLAN on an port in one call.

regards
BAstian
-
Bastian Sprotte wrote:

Hello Marek,

vlan MIBs has been added in latest 22.1 release.
on the EXOS switch you need to enable the VLAN auto-move function.

configure vlan untagged-ports auto-move on

This feature is real new, and allow to change the untagged VLAN on an port in one call.

regards
BAstian
-

i dont want to change untagged vlan in one call, i need to setup trunk port from trunk template from netsight console...
Userlevel 4
Bastian Sprotte wrote:

Hello Marek,

vlan MIBs has been added in latest 22.1 release.
on the EXOS switch you need to enable the VLAN auto-move function.

configure vlan untagged-ports auto-move on

This feature is real new, and allow to change the untagged VLAN on an port in one call.

regards
BAstian
-

which Software you running on the x440-g2
regards
Bastian
-
Bastian Sprotte wrote:

Hello Marek,

vlan MIBs has been added in latest 22.1 release.
on the EXOS switch you need to enable the VLAN auto-move function.

configure vlan untagged-ports auto-move on

This feature is real new, and allow to change the untagged VLAN on an port in one call.

regards
BAstian
-

i have 21.1.1.X

Reply