Header Only - DO NOT REMOVE - Extreme Networks

Extreme Fabric Manager - Upgrade Instructions

  • 18 June 2019
  • 2 replies

Looking for upgrade instructions on how to upgrade the Fabric Manager Application from to

2 replies

Userlevel 7
Page#70 "Upgrading Fabric Manager"

Just want to hightlight - the Fabric Manager upgrade is NOT throught the typical "switch type" firmware upgrade using the "firmware script". It is actually through the ZTP+ process.

So, you need to:

  1. uploade firmware as usural via XMC GUI: Network -> Firmware -> SCP method
  2. navigate to the newly upload firmware image, Under Device -> Fabric Manager -> Fabric Manger
  3. right click and "set as reference image"
This will trigger the ZTP+ to upgrade.

Thanks, Gates