Header Only - DO NOT REMOVE - Extreme Networks

Extreme Management center and Fortigate integration guide?


Any one have a guide in How to integrate the Extreme management center (connect) with the Fortigate?

4 replies

Userlevel 2
Hello Hossam,
I have the implementation guide for Connect 2.05, which is the latest guide I can find.
It includes instructions for the Fortigate integration.

You can download it from:
https://drive.google.com/file/d/0B5bMj99cONofd19hanpLdUpFQ1U/view?usp=sharing

Cheers,
Ryan
Userlevel 4
Schmotter, Ryan wrote:

Hello Hossam,
I have the implementation guide for Connect 2.05, which is the latest guide I can find.
It includes instructions for the Fortigate integration.

You can download it from:
https://drive.google.com/file/d/0B5bMj99cONofd19hanpLdUpFQ1U/view?usp=sharing

Cheers,
Ryan

Hello, Ryan,

Extreme Control is a required component?
Userlevel 2
Schmotter, Ryan wrote:

Hello Hossam,
I have the implementation guide for Connect 2.05, which is the latest guide I can find.
It includes instructions for the Fortigate integration.

You can download it from:
https://drive.google.com/file/d/0B5bMj99cONofd19hanpLdUpFQ1U/view?usp=sharing

Cheers,
Ryan

Yes, in order to populate the End System database, you need EAC, which updates the Fortigate. However, if you have EXOS switches and Identity Management enabled, that may populate the ES database without the requirement for EAC, it just has not been tested and is not officially supported.
Userlevel 4
Schmotter, Ryan wrote:

Hello Hossam,
I have the implementation guide for Connect 2.05, which is the latest guide I can find.
It includes instructions for the Fortigate integration.

You can download it from:
https://drive.google.com/file/d/0B5bMj99cONofd19hanpLdUpFQ1U/view?usp=sharing

Cheers,
Ryan

Thank you.

I've tested the Identity Management with EXOS switches: it gives some information in CLI about IPs, hostnames and AD users for about 10-15% of switch ports. But the data could not be sent to Netsight.

Reply