I have deployed a Netsight server, a Extreme NAC server and a c5210 wireless controller.
On the Wireless controller side:
I created a WLAN service with authentication mode 802.1x which is using a single radius server (Extreme NAC IA-A-20) for auth & acct.
I also created a role with default action:
Access Control: containment VLAN
Clicked Advanced >> Added vlan212, vlan300, vlan211 to be used. I have not defined any policy rules.
Then I defined a VNS to bind this WLAN service to this Role when user is authenticated.
On the NAC side:
I added the EWC to access control engine as "Extreme identiFi Wireless".
I created two policy roles. One of them is configured to contain to vlan211 and the other is configured to contain to vlan300.
Note: when I try to enforce domain data to wireless controller, "cannot remove active Role -XXXX- from EWC ..." error occurs.
Then I have tested with two wireless clients. I can see that both clients are assigned to these different NAC profiles successfully. But they are assigned to same vlan212.
Is it possible to assign clients with different NAC profiles to different Vlans on the same SSID ?