Header Only - DO NOT REMOVE - Extreme Networks

monitor A4 temperature in netsight


Hello
How can I monitor the A4-series switch temperature in netsight?
Also How can I read the temperature on other SNMP client?
A4 firmware 06.81.02.0007
Netsight 4.0.1.34

4 replies

Userlevel 1
Hello Alberto
I'm not sure but I think it's not possible to get this information via snmp or cli.
But if you find out how this will work I would like to know it, too.
Userlevel 3
Hello Alberto,

You will not be able to get the actual temperature from the A4, but you can get a status to see if it is in a normal range. The OID to query would be:

chEnvAmbientStatus=1.3.6.1.4.1.52.4.1.1.8.1.2

Which has values of:

chEnvAmbientStatus OBJECT-TYPE SYNTAX Integer {
unknown(1), cold(2), cool(3), normal(4), warm(5), hot(6), inoperative(7) }
Bob Maheu wrote:

Hello Alberto,

You will not be able to get the actual temperature from the A4, but you can get a status to see if it is in a normal range. The OID to query would be:

chEnvAmbientStatus=1.3.6.1.4.1.52.4.1.1.8.1.2

Which has values of:

chEnvAmbientStatus OBJECT-TYPE SYNTAX Integer {
unknown(1), cold(2), cool(3), normal(4), warm(5), hot(6), inoperative(7) }

Dear Bob
Thank you for your answere, but I have try to read with this OID code and don´t get NULL value, do you know another code to try?
Userlevel 1
Hi Bob,
thanks.

Reply