Header Only - DO NOT REMOVE - Extreme Networks

Netsight ifValidPackets, value: 0.0 for old un used ports in netsight cant remove alarm.


Userlevel 2
Hello all,

having a very minor issue with my Netsight.

Can't remove old netsight alarms for ports that are no longer used. Collect interface Statistics in console and oneview are disabled for these ports. Port traps are disabled on these ports inside the K series CLI. Not really sure what is causing these specific ports to keep the old configuration for this alarm?

-----Alarm Message-----
Sent: 03/17/2017 12:14:07 PM
Subject: NetSight Warning Alarm: Interface % Valid Packets

Device: 10.35.254.1
Severity: Warning
Message: statistic: ifValidPackets, value: 0.0, compared to: 95.0
10.35.254.1 ge.3.1

-----Alarm Message-----
Sent: 03/17/2017 12:14:07 PM
Subject: NetSight Warning Alarm: Interface % Valid Packets

Device: 10.35.254.1
Severity: Warning
Message: statistic: ifValidPackets, value: 0.0, compared to: 95.0
10.35.254.1 ge.1.21

-----Alarm Message-----
Sent: 03/17/2017 12:14:07 PM
Subject: NetSight Warning Alarm: Interface % Valid Packets

Device: 10.35.254.1
Severity: Warning
Message: statistic: ifValidPackets, value: 0.0, compared to: 95.0
10.35.254.1 ge.14.2

-----Alarm Message-----
Sent: 03/17/2017 12:14:07 PM



Subject: NetSight Warning Alarm: Interface % Valid Packets

Device: 10.35.254.1
Severity: Warning
Message: statistic: ifValidPackets, value: 0.0, compared to: 95.0
10.35.254.1 tech23003_second_line

5 replies

Userlevel 2
Currently on Netsight 7.0.6.27
about to try Netsight 7.1.1.9
Userlevel 2
Still occurring on latest Netsight release
Userlevel 6
Evan, This could be a new one, i would suggest to open up a GTAC case.
Userlevel 2
Thanks Karthik. I opened a GTAC Case this morning.
#01304051
Userlevel 2
GTAC got back to me. I was able to clear it from the instructions from Tom Currier

There may be a target left in the collection. Check OneVIew -> Administration -> Diagnostics (make sure level is diags). Expand Historical Stats Collection -> Stats collection targets. You can search on the IP address in this screen and then see if the port is still listed. If it is then delete it.

Reply