Header Only - DO NOT REMOVE - Extreme Networks
Question

Oneview - Alarm Configuration Values


Userlevel 4
We have an Interface % Usage alarm configured in netsight 6.3.0.179. When we go to edit the alarm in oneview, the "statistics name" and "cross when value" fields are blank/default. This happens even when the values have been set in oneview and seems to be specific to alarms with Threshold type Oneview. We are however able to see the correct values in Console alarm configuration. Is this the expected behavior and is there anyway to see those values in Oneview? Thanks much.

2 replies

Userlevel 6
Joshua,
This sounds like it is best resolved by opening up a case with the GTAC.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...
Userlevel 4
Mike Thomas wrote:

Joshua,
This sounds like it is best resolved by opening up a case with the GTAC.

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-contact-Extreme-Networks-Global-Tec...

Thanks. Ticket opened.

Reply