Share your custom Flexviews with the community

  • 28 October 2013
  • 28 replies
  • 905 views


Show first post

28 replies

Userlevel 7
Pala,

Thanks for the great information. Any chance that you can add the FlexViews that were mentioned at the beginning of the post?

Also, is there anything special that needs to be done with the AP3000 FlexViews? We ran them against our controller in console (6.3.0.168), but received no results. We made the assumption that they should work for 3610/3705/3805, etc.

Thanks,

Bill

Hi Bill

I added all flexviews from this thread I tested and they works.

Some were not working for me and I stored on my disk for later investigation why they do not work. you can still download them and test them by your own (http://extr.eu/NetSightFlexviews.htm)

Z.
Userlevel 7
Pala,

Thanks for the great information. Any chance that you can add the FlexViews that were mentioned at the beginning of the post?

Also, is there anything special that needs to be done with the AP3000 FlexViews? We ran them against our controller in console (6.3.0.168), but received no results. We made the assumption that they should work for 3610/3705/3805, etc.

Thanks,

Bill

We need to get those over to our GitHub page 🙂

Reply