This post is around the time-lapse location feature in Netsight since I have spent the past few hours trying to track down details in documentation.
It is found in the Maps section of Oneview when you have a map type of floor plan. It sounds like you should be able to track users/devices as they move through the network.
From conversations with GTAC and what I have put together via documentation in the controllers it depends upon the location engine services in the wireless controllers to be enabled. If I am correct, and please correct me if I am wrong, this depends upon having radar licensing and AP's that support radar so you either need the 3725, or 3825, or you would have to dedicate only a single channel on the 3705 or 3805 AP's.
The question is, is all tracking only after the fact, or if you have specified an On-demand device to tracking.
Does the Location Batch Reporting feature allow you to track all users at the specified interval automatically in Oneview or do you need a 3rd party tool like Ekahau that is being used for Real Time Location Services and that is what the destination URL is? Is there anyway to point it to the Netsight or OneFabric Control center to enable time-lapse tracking without 3rd party tools?