Currently i am converting an existing configuration from a legacy N7 device to a current X670 switch.
Converting the EOS route-based policy to EXOS route-based policy i need some help.
Existing EOS route-map:
ip access-list extended redirectACL
deny ip host 10.1.13.70 192.168.0.0 0.0.255.255
deny ip host 10.1.13.70 10.0.0.0 0.0.0.255
deny ip host 10.1.13.70 172.16.0.0 0.31.255.255
permit ip host 10.1.13.70 any
deny ip host 10.1.13.199 host 18.104.22.168
deny ip host 10.1.13.199 host 22.214.171.124
permit ip host 10.1.13.199 any
route-map policy Internet-FW permit 10
match ip address redirectACL
set next-hop 10.1.1.1
[/code]I use the deny statements for internal networks which routed based on the routing table. the permit statements have to be redicted to the firewall.
How can i achieve this with EXOS ACL and redirects actions?