Header Only - DO NOT REMOVE - Extreme Networks

Extreme D series Switch Console port not responding


Extreme D series Switch Console port not responding. blank console screen

3 replies

Userlevel 7
Does it work on another D2... are you sure that the cable and the settings (baud rate) are correct ?

-Ron
Yes it is working in another D2..cable is working fine. i have using following setting for console
Console (serial) portrequired settings
Baud rate: 9600
Data bits: 8
Flow control: disabled
Stop bits: 1
Parity: none
Userlevel 7
Sachu wrote:

Yes it is working in another D2..cable is working fine. i have using following setting for console
Console (serial) portrequired settings
Baud rate: 9600
Data bits: 8
Flow control: disabled
Stop bits: 1
Parity: none

It may be best to go ahead and start an RMA.
See this article: How to contact Extreme Networks Global Technical Assistance Center (GTAC)

Reply