Firmware updates when to expect a reboot?
I have a couple of S4 and a stack of B5's in my environment. I basically want to know when I should expect a reboot of the device when issuing firmware.
Userlevel 4
At reset. Uploading the firmware to the switch does not automatically reboot it.
Curtis Parish wrote:
You have to actively say yes to a reboot prompt as shown in the following articleAt reset. Uploading the firmware to the switch does not automatically reboot it.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-upgrade-N-S-K-Series-firmware/?q=ho...
Userlevel 4
Once you verify the image has been downloaded on the switch (by doing a DIR and seeing the image ) the next step would be to type set system boot and image name then enter The prompt will ask you if this is what you want to do!! You say yes
Userlevel 7
Also Inventory Manager is a great method to do scheduled upgrades....
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-use-NetSight-Inventory-Manager-to-upgrade-firmware-on-your-devices
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-use-NetSight-Inventory-Manager-to-upgrade-firmware-on-your-devices
Reply
Help
Shortcuts
Bold
Ctrl-B or Cmd-B
Italic
Ctrl-I or Cmd-I
Underline
Ctrl-U or Cmd-U
@Mention
@username
Upload image
Maximum file size: 2MB. Allowed image types: .jpg, .png, .gif.
Embed media
Supported platforms: YouTube, Soundcloud, Deezer, Vimeo, Dailymotion.
Enter your username or e-mail address to receive an e-mail with instructions to reset your password.