Header Only - DO NOT REMOVE - Extreme Networks

How to interpret the vlaues of ActorAdminState and ActorOperState in show port lacp port ge.x.xx status detail ?


Userlevel 1
Hi Gents,

I get below out put for show port lacp port ge.x.xx status detail in EOS. How to interprit "-----GLA"
"--DCSGLA", "-----GSA", "--DCSGLA" ?
Global Link Aggregation state : Enabled
Port Instance: ge.2.48 Port enable state: Enabled
ActorPort: 100 PartnerAdminPort: 1
ActorSystemPriority: 32768 PartnerOperPort: 475
ActorPortPriority: 32768 PartnerAdminSystemPriority: 32768
ActorAdminKey: 1 PartnerOperSystemPriority: 32768
ActorOperKey: 1 PartnerAdminPortPriority: 32768
ActorAdminState: -----GLA PartnerOperPortPriority: 32768
ActorOperState: --DCSGLA PartnerAdminKey: 1
ActorSystemID: 20:B3:99:5B:00:7E PartnerOperKey: 3
SelectedAggID: lag.0.1 PartnerAdminState: -----GSA
AttachedAggID: lag.0.1 PartnerOperState: --DCSGLA
MuxState: Coll_Dist PartnerAdminSystemID: 00:00:00:00:00:00
DebugRxState: Current PartnerOperSystemID: 20:B3:99:54:D6:48[/code]

2 replies

Userlevel 5
Hello Weda,

re:

"-----GLA" "--DCSGLA", "-----GSA", "--DCSGLA" ?

These indicate a state is true for the associated actor or partner ports:

E = Expired;

F = Defaulted;

D = Distributing (tx enabled);

C = Collecting (rx enabled);

S = Synchronized (actor and partner agree);

G = Aggregation allowed;

S/L = Short/Long LACP timeout;

A/P = Active/Passive LACP.

Best,

Mike
Userlevel 1
Mike D wrote:



Hello Weda,

re:

"-----GLA" "--DCSGLA", "-----GSA", "--DCSGLA" ?

These indicate a state is true for the associated actor or partner ports:

E = Expired;

F = Defaulted;

D = Distributing (tx enabled);

C = Collecting (rx enabled);

S = Synchronized (actor and partner agree);

G = Aggregation allowed;

S/L = Short/Long LACP timeout;

A/P = Active/Passive LACP.

Best,

Mike

Thanks for the reply.

Reply