Policy B5


Userlevel 1
Hello,
I am having trouble applying default policy on a port B5, reports the below error:



I'm using the default policy, someone help me?

12 replies

Hi.

And the event log did you see?
What's the message?
Userlevel 1
Hi,
yes, it returns an error that role can not be found on the device.
remembering that forced the standard and switch roles accepted, but when I put on a port specifies denied access policy reports the error below.



thanks.
Hi Jefferson.

It seems there isn't role "Deny Access". You have create this role first.
Userlevel 1
Hi Paulo,

I did not understand, I'm using paper that comes factory should already be was not created ?
Hi Jefferson.

Sorry. You are correct.

Did you try, select a role, go to ports, retrieve and select port?
Userlevel 1
No problem Paulo,
I do it and the error continues
Userlevel 6
Hi Jefferson,

before you set any default role, please ensure that all roles of that specific policy domain are enforced on that switch. please check that all Roles are available, then set a default policy on that port.

regards
Userlevel 1
Hi Matthias,

When you say to verify if all roles of that specific policy domain are enforced on that switch, It is to verify whether they were applied in the machine from the command line or if the roles are present in the policy manager ?
Userlevel 7
Hi Jefferson,

you should probably check both the switch and verify that the Policy Manager displays information consistent with the switch config.

The output of
show config [/code]should contain a policy section.

Br,
Erik
Userlevel 4
Hi Jefferson,

If you are still having issues sorting this out it may be helpful to give the GTAC a call.
Userlevel 1
Hello,

Thank you all for your help, I ended up finding the problem.
I suspected it was something related to NMS have not installed properly why not the default roles he applied, then installed a new version and it worked perfectly.

It's nothing related to software error, I think something happened during installation the OVA of NMS.

regards !!!
Userlevel 6
Jefferson Lemos wrote:

Hello,

Thank you all for your help, I ended up finding the problem.
I suspected it was something related to NMS have not installed properly why not the default roles he applied, then installed a new version and it worked perfectly.

It's nothing related to software error, I think something happened during installation the OVA of NMS.

regards !!!

Thanks for letting the Community know how you sorted this out Jefferson. Good stuff!

Reply