Header Only - DO NOT REMOVE - Extreme Networks

Vlan dynamicegress

I need clarification on what vlan dynamic egress is and how it works. The info provided in the documentation does not give much detail. Any info is appreciated.

5 replies

Userlevel 4
Hi Thomas,

could you share the link for the document which you are referring ?

The link to the document

It says.

By default, dynamic egress is disabled on all
VLANs. If dynamic egress is enabled for a
VLAN, the device will add the port receiving a
frame to the VLAN’s egress list as untagged
according to the VLAN ID of the received frame
Userlevel 4
Hi Thomas,

Please see the following knowledgebase document we just published to try to address your question. I hope this helps.


Best Regards
We are familiar with dynamicegress on EOS as described here. Is there a similar feature on EXOS?