Header Only - DO NOT REMOVE - Extreme Networks

Vlan Voice

  • 23 August 2019
  • 0 replies

I have three switches, 1 210-24p-GE2, 2 210-48p-GE4 and I need to cascade the 24-port to the 48, but at the time of doing so and connect a phone on the 24-port switch the phones do not receive ip addressing and if I connect a phone to the 48 switch if the phones in their respective vlan receive ip. My question is how the trunk is done correctly between switches or what configuration is missing for the phones connected to the 24-port switch to obtain ip.
the PCs connected to the 24 switch if they get ip from the corresponding vlan and the phones do not.

0 replies

Be the first to reply!