Header Only - DO NOT REMOVE - Extreme Networks

What is the equivalent of interface range from cisco in eOS


create vlan data tag 100
create vlan voip tag 200 configure vlan data add port 1 untagged configure vlan voip add port 1 tagged

How would I add this this a range of ports or a list?
[/code]

5 replies

Userlevel 1
Hi,
lets say you would like to add ports 1 to 10 on a stand alone switch then try:

configure vlan data add port 1-10 untagged
configure vlan voip add port 1-10 tagged
and if it's a stack and you want to add port 5-10 from unit 2 then it should be:
configure vlan data add port 2:5-10 untagged
configure vlan voip add port 2:5-10 tagged

I'm not a EXOS specialist but the first part is working on my stand alone X460.

Regrads,
Axel
Thanks but I am looking for eOS not eXOS
Userlevel 1
OK,
then let's say vlan data is vlan-id 100 and vlan voip is vlan-id 200 try

set port vlan ge.2.5-10 100 modify-egress
set vlan egress 200 ge.2.5-10 tagged

With "show vlan portinfo port ge.2.2-10" you can see the configuration but this command is not availabe on older EOS-Systems like DFE-Chassis.
Userlevel 7
SIE_D2(su)->set port vlan ge.1.3-4 100 modify-egress
Thanks . What would be the simple way of building a config and loading it onto a switch. Can i found a sample config that i would just modify for my needs?

Reply