We are currently running 184.108.40.206-patch1-7 on our Summit x460-G2 endpoint switches. We use third party 10 Gb SM GBICs which currently are running using auto ON.
After upgrading to 220.127.116.11-patch1-7 the port is disabled and there is a message in the log:
Warn:HAL.Port.OpticCfgCflct> Slot-1: The configuration for the SF+_LR optic module is not correct - please configure port 1:52 for auto-negotiation Off and speed 10000
I have two questions.
- Is this normal, expected behavior?
- Is there a best practice way to set this prior to upgrading?
- Disable sharing for the port
- Change the auto mode to speed 10000 duplex full
- Enable sharing again