Header Only - DO NOT REMOVE - Extreme Networks
Question

Automatically upload switch configuration daily


Userlevel 4
Create Date: Mar 26 2013 5:01PM

I can get my ExtremeWare switches to automatically upload their configs each night to a tftp server I have setup. I cannot get my ExtremeXOS switches to do the same. There doesn't seem to be the same commands on the XOS switches.

I am trying to use both version 12 and 15 of XOS firmware on switches like X460's X440's X250e's X450e's etc.

BTW: The command I use on Extreme 200 and 300 switches is below -
upload configuration /configs/.cfg every 0:59

Does anyone know what the command would be to make a XOS switch upload a config each night?
(from statonar)

3 replies

Userlevel 4
Create Date: Mar 26 2013 7:01PM

hello statonar

You are correct but what you can do is set up a UPM profile that has the upload command.

Then you can set up a timed interval so that the profile runs every 24 hours.

Hope that helps let me know if you have any other questions.

P (from Paul_Russo)
Userlevel 4
Create Date: Mar 28 2013 8:03PM

Hey thanks, that worked perfectly. Never knew the power of making upm profiles before this. (from statonar)
Userlevel 4
Create Date: Mar 28 2013 8:37PM

Great to hear. UPM and scripting in general allows you to do a lot of automated processes.

Continue to post online and we will do what we can to get you the right answers.

P (from Paul_Russo)

Reply