Header Only - DO NOT REMOVE - Extreme Networks
Question

Cablediag on VPEX

  • 6 March 2020
  • 2 replies
  • 303 views

Userlevel 1
Badge


When I try to run the cable diagnostics on a VPEX port, I get the following message:


Slot-1 VPEX HGRVCP-CORE-1.1 # run diagnostics cable ports 101:1

Do you want to continue cable diagnostics? (y/N) Yes

Error:Port 101:1 is Invalid

usage: cablediag [-h] [-p PORTLIST [PORTLIST ...]] [-f] [-d]

Port list can only be defined by ports separated by "," or "-"

e.g. 1,2,3 or 4-9 or combination 1,4,7,10-15.. etc

Slot-1 VPEX HGRVCP-CORE-1.2 #


If the feature is not available for this type of equipment, the message should be more specific.


2 replies

Please, someone from GTAC support, update this with an answer.  I am also having this problem, and it is unacceptable for the error message to clearly be incorrect. 

Userlevel 5
Badge

Hi,

 

The fastest way to reach GTAC is to e-mail or even call them so that an issue can get officially reported as they may not have enough opportunity to walk through all threads here.

https://www.extremenetworks.com/support/contact/

 

Hope that helps,

Tomasz

Reply