Header Only - DO NOT REMOVE - Extreme Networks

copy firmware from primary to secondary


I update the firmware on my EXOS switch and after reboot I want to put that firmware on the primary partition. Is there a way to do that?

2 replies

Userlevel 3
Hi James,

You would need to download image from your TFTP server and install it on the primary partition.
Please let us know if you have any other questions.
Thank you.

Best regards,
Andrew
Andrew Imam wrote:

Hi James,

You would need to download image from your TFTP server and install it on the primary partition.
Please let us know if you have any other questions.
Thank you.

Best regards,
Andrew

Hi Andrew,
Would you please tell me that which command i should use exactly to make an image from device 1 and upload it on device 2 in EXOS?
Thanks in advanced
That's what I have been doing but was hoping there was an easier way. Thanks

Reply