Header Only - DO NOT REMOVE - Extreme Networks

DDMI information of X670/X670V


Hello Sir/Madam,
I have Extrmem X670 and X670V switches in my DC. A few days ago,I used a LX transceiver from Extreme with my X670 switch to see the DDMI of this transceiver, but the switch didn't show the DDMI infromation, so did X670V. I know the command and operated it,but it wasn't useful. Please tell me the right way to observe the transceiver's DDMI ,thanks for your help.

5 replies

Userlevel 4
I didn't test for all, but some of old optics(10070H) on X670 and X670V not support DDMI, the newer one (10051H) is supported. It's better to check the model of optics first.
Steven Lin wrote:

I didn't test for all, but some of old optics(10070H) on X670 and X670V not support DDMI, the newer one (10051H) is supported. It's better to check the model of optics first.

Hello,Steven:
Thanks for your help. There are some other questions.As for the old optics(10070H) that you told, the model type is 10/100/1000base -T copper.These transceivers havn't the DDMI function,so we can't observe the information of DDMI.
But the type of 10050H is SFP SX,It supports the DDMI. so the DDMI information should be supported by X670/X670V,but they didn't as well.
the picture shows the transceiver which I use now,are there something wrong Thanks for your help again.

Userlevel 4
Steven Lin wrote:

I didn't test for all, but some of old optics(10070H) on X670 and X670V not support DDMI, the newer one (10051H) is supported. It's better to check the model of optics first.

Hello Ben,
I didn't see 10050H under below the Summit switch supporting list, that means 10050H is not officially supported on your platform.

https://www.extremenetworks.com/extreme-hardwaresoftware-compatibility-recommendation-matrices/summi...
Userlevel 5
Hi Ben,

Please check this discussion

Why I am geting this error ?? What is the exact meaning of DDMI ?
https://community.extremenetworks.com/extreme/topics/why-i-am-geting-this-error-what-is-the-exact-me...

Hope it helps
Best regards
Userlevel 7
Ben,

Are you all set with this issue?

Reply