Header Only - DO NOT REMOVE - Extreme Networks

Default username and password for failsafe account for Summit X450e-48p

  • 7 January 2014
  • 2 replies
  • 484 views

Userlevel 4
Create Date: Sep 19 2012 5:45AM

Hi,

Can anybody tell us default username and password for failsafe account for Summit X450e-48p Network Switch and how to login into this account.

Thanks, (from Rajesh_Panchal)

2 replies

Userlevel 4
Create Date: Sep 28 2012 10:57PM

Hey harpThere is no default fail safe account. TAC should be able to get you back in if you have a pc connected to the serial port and have it on a network for them to control.Other than that you have to factory default the switch and use admin with no password.You can configure a fail safe account using the configure failsafe command.Good luckP (from Paul_Russo)
Userlevel 4
Create Date: Oct 9 2012 8:04PM

1. Load to BootROM && type "config none" && "reboot" you will boot with default config
2. After all of this you can configure mgmt ip (DON'T SAVE CONFIG!!!!) && ls (there is your config with lost pass) && upload this congig to your tftp server
3. Open your config (xml mode, such as primary.cfg) in text editor find accounts tag and add line

11

this will add default admin account to your config (login:admin pass: 'enter(none)), save file and load to switch

4. use configuration 'name' && reboot
5. correct your accounts and politics

ENJOY (from pacan4ik1_pacan4ik1)

Reply