Header Only - DO NOT REMOVE - Extreme Networks

Edit SNMP config


Userlevel 1
Hi! i need edit snmp config at the sw.

I have this configuration
"configure snmp access-profile snmp_access1 readwrite" and want chenge to readonly:

"configure snmp access-profile snmp_access1 readonly" but i see a CLI error:

Error: Please remove previously configured rule(s) before configuring policy snmp_access1

How remove previously configured rule?

Regards

3 replies

Userlevel 6
Hi Daniel, to change from RW to RO you have to follow the steps below:

config snmp access-profile none
config snmp access-profile snmp_access1 readonly
Userlevel 7
Henrique wrote:

Hi Daniel, to change from RW to RO you have to follow the steps below:

config snmp access-profile none
config snmp access-profile snmp_access1 readonly

XOS command guide -->
http://documentation.extremenetworks.com/exos_commands/EXOS_21_1/EXOS_Commands_All/r_configure-snmp-...
Userlevel 1
Henrique wrote:

Hi Daniel, to change from RW to RO you have to follow the steps below:

config snmp access-profile none
config snmp access-profile snmp_access1 readonly

Thanks bro...

Reply