Header Only - DO NOT REMOVE - Extreme Networks

EXOS MLAG Configuration


Userlevel 1
I have two stacks of 870s as a Core and X690 as an edge switch. To create MLAG, I found peer & ISC configuration details from below:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-MLAG-in-Extreme-switches

But I couldn't found any article covering both core and edge configuration for EXOS MLAG just like in below case where core is EXOS and edge is EOS:

https://gtacknowledge.extremenetworks.com/articles/Q_A/How-to-configure-MLAG-with-EXOS-core-switches...

Please advise

2 replies

Userlevel 7
For the access switch the 2x core switches look like one switch (that's the main function of MLAG) - so you just configure a normal LAG on the access switch

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-or-delete-a-share-group-in-E...
Userlevel 1
Ron wrote:

For the access switch the 2x core switches look like one switch (that's the main function of MLAG) - so you just configure a normal LAG on the access switch

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-create-or-delete-a-share-group-in-E...

Thanks Ronald for clarification and assistance.

Reply