Header Only - DO NOT REMOVE - Extreme Networks
Question

"Failed to determine exact hardware type for the SummitX platform"


Userlevel 4
Create Date: Apr 9 2013 6:49PM

Hello.

I have one Summit x450a-24t which doesn't boot. I tried to boot pri/sec images (boot 1/boot 2) and diagnostic (boot 3/boot 4) from BootPROM, but unsuccessfully. Boot hangs on "Failed to determine exact hardware type for the SummitX platform" message.

Thanks.

=====================================Running POST... PASSED

Version 1.0.3.1 Branch trunk by release-manager on Fri 04/20/07
Copyright 2003-2007, Extreme Networks, Inc.

Press and hold the to enter the bootrom.

Loading EXOS Image ...|

Running Image ...

Failed to determine exact hardware type for the SummitX platform!
This hardware is not supported by this software release. Please see the
ExtremeWare XOS Concepts Guide for information on installing a newer
software release. See the Release Notes for your hardware to verify the
supported ExtremeWare XOS releases.[/code][/code] (from demyan)

2 replies

Userlevel 4
Create Date: Apr 16 2013 5:10AM

EEPROM is corrupted and you cannot restore it with standart instruments, we have RMA in same situation. (from pacan4ik1_pacan4ik1)
Userlevel 4
Create Date: Apr 17 2013 8:04AM

Thanks! (from demyan)

Reply