Solved

How can i detect a new entry in the fdb table ?


Hello every one,


How can i detect a new entry in the fdb table to associate it with a upm profil for start a upm script when a new mac arrived in the fdb table, i already look events in the log filter to associate it with a log target upm profile, but I did not find anything interesting.

Thank for your help (and sorry for my bad english)

Alex.
icon

Best answer by Kawawa 6 March 2019, 12:02

You can configure MAC tracking on the ports ports you'd like to detect MAC addresses on and add the following to the log filter. You can either choose one port, a range of ports or all:

code:
configure log filter defaultFilter add events FDB.MACTracking.MACAdd
configure fdb mac-tracking add ports [port(s)]



Once you've done the above you should see the following each time a MAC is added:

code:
01/01/2019 01:01:00.00  The MAC address 00:11:22:CC:01:01 was added on VLAN "Default, port 1



NOTE: Be aware that MAC Tracking can result in higher CPU utilization

View original

2 replies

Userlevel 5
You can configure MAC tracking on the ports ports you'd like to detect MAC addresses on and add the following to the log filter. You can either choose one port, a range of ports or all:

code:
configure log filter defaultFilter add events FDB.MACTracking.MACAdd
configure fdb mac-tracking add ports [port(s)]



Once you've done the above you should see the following each time a MAC is added:

code:
01/01/2019 01:01:00.00  The MAC address 00:11:22:CC:01:01 was added on VLAN "Default, port 1



NOTE: Be aware that MAC Tracking can result in higher CPU utilization
Thank you very much! This will definitely get me going

Alex

Reply