Header Only - DO NOT REMOVE - Extreme Networks

How to run this script

how to run the below

create qosprofile "QP5"
#Start editor to create file#
vi omsubnet.pol

#Enter insert mode#

#Copy and Paste the below#
entry QP5subnet {
if {
then {
Qosprofile qp5;
#To this line#

#To save#

#Enable DSCP replacement#
configure access-list omsubnet.pol


1 reply

Userlevel 5
Khalid, we do have an article that walks through creating and applying an access-list in further detail:


You would have to use your policy instead of the example in the article. Be sure to press escape and i (insert) before pasting otherwise you may miss a line.

The policy will have to be applied to port or VLAN:

configure access-list [port|vlan] [ingress|egress]

You can also verify whether there are any errors in the policy using:

check policy