Question

icmp time-exceeded rate limit


It appears there is some type of rate limiting for icmp time-exceeded messages. Is it possible to configure this?
lines 2, 3, and 4 are extreme switches x460/480, a traceroute:

1 <1 ms <1 ms <1 ms xxxxx[/code] 2 10 ms 5 ms * xxxxx[/code] 3 2 ms 3 ms * xxxxx[/code] 4 5 ms * 2 ms xxxxx[/code] 5 32 ms 11 ms 4 ms xxxxx[/code] 6 36 ms 18 ms 4 ms xxxxx[/code] 7 11 ms 7 ms 6 ms xxxxx[/code] 8 3 ms 3 ms 3 ms xxxxx[/code] 9 3 ms 3 ms 3 ms xxxxx[/code] 10 7 ms 7 ms 7 ms xxxxx[/code]

1 reply

Userlevel 5
Dave,

Looks like it is a enable/disable only and timing is not configurable.. I am sure you could do some type of ACL to customize if you want..

http://documentation.extremenetworks.com/exos_commands/EXOS_All/EXOS_Commands_All/r_disable-icmp-tim...

Bill

Reply