I have an existing stack for the access layer and want to add a TOR switch.
All x450e 188.8.131.52
configured vlans to match the stack
removed all ports from default vlan(matching the old stack)
enabled IP forwarding
routes show the existing stack vlan gateways and the new interface ips for the vlan
I didn't really want to assign IP address to the vlans on the new TOR switch, but it seemed to be required.
I believe I am missing a key concept on how vlan does its routing(am cisco guy, this is my first extreme shop), does anyone know of a good guide/cookbook to config this specific scenario?
I feel like I should add the vlan gateways from the stack, and be good to go... but that failed on my first go.