Header Only - DO NOT REMOVE - Extreme Networks

Looking for clarification on the enable iproute sharing command


Dear all, I used this command enable iproute sharing and then in routing table show tow routes but traffic one path so why ? Please tell me.

2 replies

Userlevel 5
Could you verify whether forwarding is enabled on the shared routes and which algorithm is being used. The following article may help:

https://gtacknowledge.extremenetworks.com/articles/How_To/Not-all-the-ECMP-routes-are-being-used-for...
Ty Izzet wrote:

Could you verify whether forwarding is enabled on the shared routes and which algorithm is being used. The following article may help:

https://gtacknowledge.extremenetworks.com/articles/How_To/Not-all-the-ECMP-routes-are-being-used-for...

Thanks

Reply