Header Only - DO NOT REMOVE - Extreme Networks

Mirror with access to the probe


Userlevel 1
Hello,

I'm searching a way to allow data on one client vlan on a mirroring destination port.

This is for keep a distant remote session on the probe (for example, TSE, SSH or VNC session). Do you know if it's possible with Extreme Networks Summit family ?

Thanks in advance.

3 replies

Userlevel 6
I think remote mirroring could be a solution, there you copy the mirrored traffic to a tag. If you add that to the same port the probe is on you can have a normal vlan to that probe and the mirror tag.
Userlevel 6
Here is an article that may help get you started:

https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-remote-mirroring
Userlevel 1
Hello,

good advice, it's working.

Thanks !

Reply