Hi All ;
We are currently attempting to boot a 2x10GbE server with Intel 82559 NICs with Boot Agent (XE). We have both NICs set to PXE boot. We get an IP address from DHCP on one of the NICs, but we cannot get the boot file pxelinux.0 over TFP, it just hangs.
If we put a machine on the same VLAN it gets the file no issues, its the LACP LAG that it seems to choke on.
Whats the proper switch config (single switch, no stack) that allows a PXE boot from a LACP LAG. Ive tried a huge number of things and cant figure it out.