Header Only - DO NOT REMOVE - Extreme Networks
Question

Process hal died


Userlevel 2
Hello community,

Two adjancies switchs rebooted signalling that the process died.
The first one said:

02/04/2017 09:14:07.07 Connection lost with process hal02/04/2017 09:14:00.90 2cf66824 0320f809 jalr t9
02/04/2017 09:14:00.90 2cf66820 00000000 nop
02/04/2017 09:14:00.90 2cf6681c 8f99829c lw t9,-32100(gp)
02/04/2017 09:14:00.90 2cf66818 8fa4002c lw a0,44(sp)
02/04/2017 09:14:00.90 2cf66814 afa70028 sw a3,40(sp)
02/04/2017 09:14:00.90 2cf66810 sw v0,36(sp)
02/04/2017 09:14:00.90 2cf6680c 0000000c syscall 0
02/04/2017 09:14:00.90 2cf66808 24021046 addiu v0,zero,4166
02/04/2017 09:14:00.90 2cf66804 8fa50004 lw a1,4(sp)
02/04/2017 09:14:00.90 Code:
02/04/2017 09:14:00.90
02/04/2017 09:14:00.90 Process hal pid 1518 died with signal 6
02/04/2017 09:14:00.46 Process hal ID 1474 killed
02/04/2017 09:14:00.46 Because the Parent process (715995392) thread of process 1474, has not responded within 41 periods of 10 seconds, the process will be terminated.

and then the second:

02/04/2017 09:24:06.88 Connection lost with process hal02/04/2017 09:24:00.10 2cf66824 0320f809 jalr t9
02/04/2017 09:24:00.10 2cf66820 00000000 nop
02/04/2017 09:24:00.10 2cf6681c 8f99829c lw t9,-32100(gp)
02/04/2017 09:24:00.10 2cf66818 8fa4002c lw a0,44(sp)
02/04/2017 09:24:00.10 2cf66814 afa70028 sw a3,40(sp)
02/04/2017 09:24:00.10 2cf66810 sw v0,36(sp)
02/04/2017 09:24:00.10 2cf6680c 0000000c syscall 0
02/04/2017 09:24:00.10 2cf66808 24021046 addiu v0,zero,4166
02/04/2017 09:24:00.10 2cf66804 8fa50004 lw a1,4(sp)
02/04/2017 09:24:00.10 Code:
02/04/2017 09:24:00.10
02/04/2017 09:24:00.10 Process hal pid 1510 died with signal 6
02/04/2017 09:23:59.67 Process hal ID 1474 killed
02/04/2017 09:23:59.67 Because the Parent process (715995392) thread of process 1474, has not responded within 41 periods of 10 seconds, the process will be terminated.

How could that be possible? Two in a row?

2 replies

Userlevel 6
Please contact GTAC. There is a great team what will help 🙂.
Userlevel 4
Need to check complete show tech and the current version of software running at this moment on this device. If possible then do provide us the same here else can contact our GTAC support team working 24/7.

Reply