Rename eaps ring name


Userlevel 4
I have an EAPS ring with 7 nodes. Can I rename the EAPS domain name without any problems

3 replies

Userlevel 6
Hello Johan,

we tested it quickly in our lab (only 1 eaps ring) and it gave no problems. We did see a log event that EXOS was unable to start the new domain as it was already started but that seemed to be the only issue.

10/21/2015 12:55:00.22 [i] EAPSD TAC-EAPS - Event Start. Domain has already been started.
10/21/2015 12:55:00.22 [i] 10.112.2.123 (telnet) admin: configure eaps "TAC_EAPS" name TAC-EAPS

I would advice to do this on a quiet time in case something does happen.

Best regards, Oscar
Userlevel 4
OscarK wrote:

Hello Johan,

we tested it quickly in our lab (only 1 eaps ring) and it gave no problems. We did see a log event that EXOS was unable to start the new domain as it was already started but that seemed to be the only issue.

10/21/2015 12:55:00.22 [i] EAPSD TAC-EAPS - Event Start. Domain has already been started.
10/21/2015 12:55:00.22 [i] 10.112.2.123 (telnet) admin: configure eaps "TAC_EAPS" name TAC-EAPS

I would advice to do this on a quiet time in case something does happen.

Best regards, Oscar

Thanks Oscar. I will do it in a maintenance slot
Userlevel 4
OscarK wrote:

Hello Johan,

we tested it quickly in our lab (only 1 eaps ring) and it gave no problems. We did see a log event that EXOS was unable to start the new domain as it was already started but that seemed to be the only issue.

10/21/2015 12:55:00.22 [i] EAPSD TAC-EAPS - Event Start. Domain has already been started.
10/21/2015 12:55:00.22 [i] 10.112.2.123 (telnet) admin: configure eaps "TAC_EAPS" name TAC-EAPS

I would advice to do this on a quiet time in case something does happen.

Best regards, Oscar

Oscar, rename done without any problem

Reply