We replaced an MSM on a BD8810. When we first installed it, It upgraded firmware and then came online. We had though that it had just installed new firmware to the new card and it was working as expected. However, now I have noticed that it actually pushed the updated firmware to the primary (currently unused) partition on the working MSM and now MSM-A and MSM-B have different firmware. The active MSM is using the secondary image at 188.8.131.52 (primary = 184.108.40.206), while the inactive MSM has both images at 220.127.116.11. If the active MSM fails will it now reboot because the images are incompatible?