I want to start by stating that I am new to Extreme and managed switches for that matter. I am having trouble getting a vlan to work with my setup and I know its lack of knowledge that is getting me stuck on this issue.
Scenario: I have a Ubiqtuiti USG and 2 Ubiquiti AP's. I have 2 SSID's running on them. One is the main network and the other is guest. I have the main network not vlan tagged and its working as it should. The problem is that I can't get the guest network running as it should on vlan 10 and with it in an unmanaged switch it is fine, but when I add it to the managed extreme 450e-48p it wont even hand the IP out. My main network is on 10.0.0.0/8 and my guest network is on 18.104.22.168/16.
What I have done:
create vlan guest
config vlan guest tag 10
config vlan guest add port 17 tagged (ports the AP is plugged into)
config vlan guest add port 18 tagged <^
Thank you in advance and if I am missing anything that needs to be here to figure this out, let me know and I will post it.