Header Only - DO NOT REMOVE - Extreme Networks

SFP module inventory


Is there a way to list installed SFP module model numbers from the CLI in EXOS 16.1.3.6 on a X670V-48x?

6 replies

I believe the command is Debug Hal show optic information There might be a dash in there.
Userlevel 7
David Coglianese wrote:

I believe the command is Debug Hal show optic information There might be a dash in there.

You're right, David. 'debug hal show optic-info' should get this info.
Worked great. Thank you for the quick response.
is there a similar command available for the A-/B-/C-/S-/K-series?
Userlevel 4
That is a little tricky and once you filter though the results you should have a idea of the items So as a standalone switch Console Only Dev DumpSfp When in a stacking 2 or more You would run thesame ccommand above for the manager unit But In order to see the other units components This command only works on the manager switch enableMemberDevshell You can now move the console to each switches console and get the data
Userlevel 4
Please note:
You can run the following command if using telnet/ssh to get the feedback
set remote enable

Reply