Header Only - DO NOT REMOVE - Extreme Networks

Show Power Consumption of X440-G2


Userlevel 2
How do I see the power consumption of an X440-G2? All the switches I have with modular power supplies (X460s and X450s) display their current wattage when I use the "show power" command. The X440s show N/A for power usage and "show power detail" just tells me that the power supply is on and it is an internal power supply.

8 replies

Userlevel 4
You can issue a "show inline info detail ports" command to see the per-port power use if that's what you're looking for. Simply entering "show inline" will give you a nice summary page.
Userlevel 4
Eric Burke wrote:

You can issue a "show inline info detail ports" command to see the per-port power use if that's what you're looking for. Simply entering "show inline" will give you a nice summary page.

I should note, "inline" is short for "inline-power"...
Userlevel 2
Eric Burke wrote:

You can issue a "show inline info detail ports" command to see the per-port power use if that's what you're looking for. Simply entering "show inline" will give you a nice summary page.

This is for POE rather than mains power consumption
Userlevel 4
Eric Burke wrote:

You can issue a "show inline info detail ports" command to see the per-port power use if that's what you're looking for. Simply entering "show inline" will give you a nice summary page.

Thanks Ash... I totally mis-read that, so thanks for clarifying!
Userlevel 2
Eric Burke wrote:

You can issue a "show inline info detail ports" command to see the per-port power use if that's what you're looking for. Simply entering "show inline" will give you a nice summary page.

No worries!
Userlevel 2
Eric Burke wrote:

You can issue a "show inline info detail ports" command to see the per-port power use if that's what you're looking for. Simply entering "show inline" will give you a nice summary page.

I think this will get me the info I need. Thanks!
Userlevel 2
Hello Terren,

The 440-G2's do not have field replaceable PSUs so that output/functionality is not supported on this HW platform.
Userlevel 6
I know this is not what you want but the units use so little power if they are not POE... Link to detail data pages gives you min-max usage on all the models

https://cloud.kapostcontent.net/pub/b9e7ae6c-3734-463e-bb6e-b1d067c59623/extremeswitching-x440-g2-ds...

Reply