Question

show vlan statistics not show the tx total and tx Byte X440-48p


the show vlan statistics is not showing the TX frames or Bytes
have a X440-48p
Vlan Rx Total Rx Byte Tx Total Tx Byte
Frames Count Frames Count
================================================================================
Default 313831111 183112494472 - -
voice 125149 10530642 - -

7 replies

Userlevel 3
Hi Jarret,

According to the Guidelines & limitations section in the EXOS 16.1 User Guide (page 459), Only BlackDiamond X8 and 8900 series modules, and Summit X460, X460G2, X480, X670, X670G2, and X770 switches provide support for both receive and transmit statistics.
Please let us know if you have any other questions.
Thank you.

Best regards,
Andrew
Andrew Imam wrote:

Hi Jarret,

According to the Guidelines & limitations section in the EXOS 16.1 User Guide (page 459), Only BlackDiamond X8 and 8900 series modules, and Summit X460, X460G2, X480, X670, X670G2, and X770 switches provide support for both receive and transmit statistics.
Please let us know if you have any other questions.
Thank you.

Best regards,
Andrew

Ya did try the config port all monitor vlan "voice" tx-only
no joy, O well thanks for the speedy reply
Userlevel 3
with the correct the page #
--------------------------------------

Hi Jarret,

According to the Guidelines & limitations section in the EXOS 16.1 User Guide (page 459), Only BlackDiamond X8 and 8900 series modules, and Summit X460, X460G2, X480, X670, X670G2, and X770 switches provide support for both receive and transmit statistics.
Please let us know if you have any other questions.
Thank you.

Best regards,
Andrew
Userlevel 6
Did you use the rx-only option when enabling it?
ya
o well
Thanks for speedy reply
Userlevel 5
Hi, This article may help you.

Show vlan statistics don't show Tx counters
https://gtacknowledge.extremenetworks.com/articles/Q_A/Show-vlan-statistics-don-t-show-Tx-counters

Best regards

Reply