Header Only - DO NOT REMOVE - Extreme Networks
Question

SNMP Transceiver Information


Hello Community,

I would like to know if there's possible to get an information output about transceiver DDM ports.

Like command below, I want to get those information, is there possible?

Port Temp TxPower RxPower TxBiasCurrent Voltage-Aux1/ Voltage-Aux2 (Celsius) (dBm) (dBm) (mA) Vcc (Volts) (Volts)
================================================================================
1 37.81 2.64 -8.02 35.96 3.28 N/A

1 reply

Userlevel 4
Please check the chapter # 52 Supported Standards, Protocols,and MIBs from EXOS concept guide and see if it is mention there.

If not then it is not being supported by EXOS.

Reply