Solved

Summit X690 48t ports speed options

  • 27 February 2019
  • 1 reply
  • 1031 views

Badge
Hi guys,

which ports configuration is possible with Summit X690 48t?

100/1000/10000
or
1000/10000

In Data Sheet are both options.

Thanks.

--
peter
icon

Best answer by Drew C. 27 February 2019, 22:50

Hi Peter,
I just checked an X690-48t in the lab. 100/1000/10000 seem to be the supported speeds. Even though 10M is listed, it is not supported.

code:
* X690-48t-2q-4c.1 # config port 24 auto off speed
10, 100, 1000(1G), 2500(2.5G), 5000(5G), 10000(10G), 25000(25G), 40000(40G), 50000(50G), 100000(100G)
* X690-48t-2q-4c.1 # config port 24 auto off speed 10 duplex full
Error: Speed specified is not supported on port 24.
* X690-48t-2q-4c.2 # config port 24 auto off speed 100 duplex full
* X690-48t-2q-4c.3 #
* X690-48t-2q-4c.3 # show port 24 conf no
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri Red
================================================================================
24 VR-Default E R OFF 100 FULL UTP
================================================================================
> indicates Port Display Name truncated past 8 characters
Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback
Port State: D-Disabled, E-Enabled, L-License Disabled
Media: !-Unsupported, $-Unlicensed
Media Red: * - use "show port info detail" for redundant media type
Flow Cntrl: Shows link partner's abilities. NONE if Auto Neg is OFF


I'll mention the discrepancy in the information on Page 1 and Page 3 to the product team to review and update.
View original

1 reply

Userlevel 7
Hi Peter,
I just checked an X690-48t in the lab. 100/1000/10000 seem to be the supported speeds. Even though 10M is listed, it is not supported.

code:
* X690-48t-2q-4c.1 # config port 24 auto off speed
10, 100, 1000(1G), 2500(2.5G), 5000(5G), 10000(10G), 25000(25G), 40000(40G), 50000(50G), 100000(100G)
* X690-48t-2q-4c.1 # config port 24 auto off speed 10 duplex full
Error: Speed specified is not supported on port 24.
* X690-48t-2q-4c.2 # config port 24 auto off speed 100 duplex full
* X690-48t-2q-4c.3 #
* X690-48t-2q-4c.3 # show port 24 conf no
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri Red
================================================================================
24 VR-Default E R OFF 100 FULL UTP
================================================================================
> indicates Port Display Name truncated past 8 characters
Link State: A-Active, R-Ready, NP-Port Not Present, L-Loopback
Port State: D-Disabled, E-Enabled, L-License Disabled
Media: !-Unsupported, $-Unlicensed
Media Red: * - use "show port info detail" for redundant media type
Flow Cntrl: Shows link partner's abilities. NONE if Auto Neg is OFF


I'll mention the discrepancy in the information on Page 1 and Page 3 to the product team to review and update.

Reply