Upgrading EXOS and SSH together

Userlevel 5
A simple procedure for upgrading EXOS and other .xmod modules, such as SSH, at the same time using the CLI from an existing console/telnet/ssh session:

Enter the CLI command:show switch | include "Image Booted"[/code]It should be either primary or secondary.

For this example, let's assume it says: Image Booted: primary[/code]Download the .xos image first, followed by any .xmod images to the inactive partition
download image .xos secondary
download image .xmod secondary
reboot[/code]After reboot the new EXOS image and .xmod are running.

Summit example:
show switch | include "Image Booted"
Image Booted: primary
download image summitX- secondary
download image summitX- secondary

0 replies

Be the first to reply!