Solved

x430-24t firmware

  • 26 June 2019
  • 8 replies
  • 350 views

Hi! give me x430-24t firmware update please
icon

Best answer by Necheporenko, Nikolay 26 June 2019, 10:24

Hello a.garashko,

Please check article where is described how you can download EXOS firmware.https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-get-access-to-Extranet-for-for-firmware-and-configuration-guide-downloads/?q=download+exos&l=en_US&fs=Search&pn=1

Best Regards,
Nikolay
View original

8 replies

Userlevel 4
Hello a.garashko,

Please check article where is described how you can download EXOS firmware.https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-get-access-to-Extranet-for-for-firmware-and-configuration-guide-downloads/?q=download+exos&l=en_US&fs=Search&pn=1

Best Regards,
Nikolay
BootRom > download image 192.168.88.110 summitlite-16.2.5.4-patch1-13-LegacyCLI.xmod
Using eth0 device
TFTP from server 192.168.88.110; our IP address is 192.168.88.111
Filename 'summitlite-16.2.5.4-patch1-13-LegacyCLI.xmod'.
Load address: 0x85000000
Loading: \
done
Bytes transferred = 1102500 (10d2a4 hex)
Uncompressing ...
## No elf image at address 0x85000000
invalid elf header
Userlevel 4
Hello,

xmod is a module and not an OS. You have to use *.xos file for upgrading firmware.

Best Regards,
Nikolay
hello? get me link .xos file for my device please
firmware version 16.2.5.4 is not installing on my device, bootrom version 1.0.1.1
how upgrade bootrom on this device?
Userlevel 4
could you please share a log?

/Nikolay
nope, the switch does not respond to requests after it starts downloading firmware from TFTP
Userlevel 7
nope, the switch does not respond to requests after it starts downloading firmware from TFTP
We're going to need more information on this. The download command will eventually time-out if there is a problem.
What is the exact command are you using to download the image? What's the error displayed after the time-out?

Reply