Solved

X440-G2 Dual 10GbE Upgrade License Configuration

  • 3 September 2019
  • 6 replies
  • 133 views

Hi all,

I have a X440-G2 switch with Dual 10GbE Upgrade License. i want the step by step configuration on the switch to enable the ports to 10G

Thank you
icon

Best answer by Ronald Dvorak 4 September 2019, 10:22

View original

6 replies

Userlevel 3
1) You use your entitlement to create a license key for a specific serial number in Licensing Portal.
2) You enter the license into the switch as explained in the documentation.
The ports now miraculously work with 10G speed 😃
Thank you for your reply @jeronimo ... i am unable to find a documet for step by step configuration guide. could you please share the documentation.
Userlevel 3
You just use "enable license license-key".

What problem are you facing exactly?
@jeronimo thank you so much for you help it worked now. i am new to extreme and did not know the cli command for enabling the license.
Userlevel 7
Hi,
here a link to the XOS doumentation page.....

https://www.extremenetworks.com/support/documentation/extremexos-22-7/


... and the "enable license" page from the CLI guide...
https://documentation.extremenetworks.com/exos_commands_22.7/GUID-E03F00CA-D737-4B1B-895D-35DE9E848A1F.shtml

-Ron
@Ronald Dvorak thank you for your reply. i have enabled the license successfully.

Reply