x440 gbic issues


Userlevel 2
Issues with gbic 10gb, the same gbic works on others model (x450-g2).

Slot-2 Stack.6 # debug hal show optic-info slot 2 port 28
Port 28
SFP or SFP+: SFP
Signal: not present
TX Fault: no
SFP/SFP+ Vendor: 7/ot
SFP/SFP+ Part Number: S+85DLC03D
SFP/SFP+ Serial Number: STTS5
SFP/SFP+ Manufacture Date: 07
SFP/SFP+ Type: SFP/SFP+
Connector: LC
GE Compliance: UNKNOWN (0x0)
Wavelength: 815

I upgrade the firmware for last version, but the same message, its occurs on 2 x440-g2 24t.

24 replies

Userlevel 4
Hello Luis,
When you try the same SFP with x450g2, is the other end device and port were same?
Userlevel 2
What is the exact model of the one you are trying to populate?

"X450-G2 also provides a choice of either 4 1GbE or 4 10GbE uplink ports on the front faceplate"
Userlevel 2
Stachal wrote:

What is the exact model of the one you are trying to populate?

"X450-G2 also provides a choice of either 4 1GbE or 4 10GbE uplink ports on the front faceplate"

Sorry wrong switch I have updated the list below with x440 models and features.
Userlevel 2
Stachal wrote:

What is the exact model of the one you are trying to populate?

"X450-G2 also provides a choice of either 4 1GbE or 4 10GbE uplink ports on the front faceplate"

Yes, but if i CONECT on any sfp port in other model (x460,x670) the gbic is recognize.. I update, downgrade de firmware, now is on versio 21.xx
Userlevel 2
switch1# sho switch

SysName: switch1
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: **:**:**:**:**:**
System Type: X440-8t

These are the Models and port configurations for the X450

Summit X440-8t
8 x 10/100/1000BASE-T (RJ45) ports
4 x 100/1000BASE-X (SFP) unpopulated ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
Summit X440-8p
8 x 10/100/1000BASE-T PoE-plus(RJ45) ports
4 x 100/1000BASE-X (SFP) unpopulated ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
Summit X440-24t
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24tDC
2 x SummitStack
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x DC PSU
1 x Redundant Power Supply connector
Summit X440-24p
24 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x SummitStack
1 x Serial (console port ) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24x
24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
4 x 10/100/1000BASE-T (RJ45) combo ports
2 x SummitStack
1 x Serial (console port ) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48t
48 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48tDC
48 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x DC PSU
1 x Redundant Power Supply connector
Summit X440-48p
48 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24t-10G
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24p-10G
24 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24x-10G
24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
4 x 10/100/1000BASE-T (RJ45) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48t-10G
48 x 10/100/1000BASE-T (RJ45) – 2 ports are combo ports
2 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48p-10G
48 x 10/100/1000BASE-T PoE-plus(RJ45) – 2 ports are combo ports
2 x 100/1000BASE-X (SFP) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connec
Userlevel 2
Stachal wrote:

switch1# sho switch

SysName: switch1
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: **:**:**:**:**:**
System Type: X440-8t

These are the Models and port configurations for the X450

Summit X440-8t
8 x 10/100/1000BASE-T (RJ45) ports
4 x 100/1000BASE-X (SFP) unpopulated ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
Summit X440-8p
8 x 10/100/1000BASE-T PoE-plus(RJ45) ports
4 x 100/1000BASE-X (SFP) unpopulated ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
Summit X440-24t
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24tDC
2 x SummitStack
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x DC PSU
1 x Redundant Power Supply connector
Summit X440-24p
24 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x SummitStack
1 x Serial (console port ) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24x
24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
4 x 10/100/1000BASE-T (RJ45) combo ports
2 x SummitStack
1 x Serial (console port ) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48t
48 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48tDC
48 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x DC PSU
1 x Redundant Power Supply connector
Summit X440-48p
48 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24t-10G
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24p-10G
24 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24x-10G
24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
4 x 10/100/1000BASE-T (RJ45) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48t-10G
48 x 10/100/1000BASE-T (RJ45) – 2 ports are combo ports
2 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48p-10G
48 x 10/100/1000BASE-T PoE-plus(RJ45) – 2 ports are combo ports
2 x 100/1000BASE-X (SFP) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connec

Summit X440-24p-10G is the model
Userlevel 2
Stachal wrote:

switch1# sho switch

SysName: switch1
SysLocation:
SysContact: support@extremenetworks.com, +1 888 257 3000
System MAC: **:**:**:**:**:**
System Type: X440-8t

These are the Models and port configurations for the X450

Summit X440-8t
8 x 10/100/1000BASE-T (RJ45) ports
4 x 100/1000BASE-X (SFP) unpopulated ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
Summit X440-8p
8 x 10/100/1000BASE-T PoE-plus(RJ45) ports
4 x 100/1000BASE-X (SFP) unpopulated ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
Summit X440-24t
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24tDC
2 x SummitStack
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x DC PSU
1 x Redundant Power Supply connector
Summit X440-24p
24 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x SummitStack
1 x Serial (console port ) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24x
24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
4 x 10/100/1000BASE-T (RJ45) combo ports
2 x SummitStack
1 x Serial (console port ) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48t
48 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48tDC
48 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x DC PSU
1 x Redundant Power Supply connector
Summit X440-48p
48 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x SummitStack
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24t-10G
24 x 10/100/1000BASE-T (RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24p-10G
24 x 10/100/1000BASE-T PoE-plus(RJ45) – 4 ports are combo ports
4 x 100/1000BASE-X (SFP) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-24x-10G
24 x 100/1000BASE-X (SFP) unpopulated ports – 4 ports are combo ports
4 x 10/100/1000BASE-T (RJ45) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48t-10G
48 x 10/100/1000BASE-T (RJ45) – 2 ports are combo ports
2 x 100/1000BASE-X (SFP) unpopulated combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connector
Summit X440-48p-10G
48 x 10/100/1000BASE-T PoE-plus(RJ45) – 2 ports are combo ports
2 x 100/1000BASE-X (SFP) combo ports
2 x 10GBASE-X SFP+ (1G/10G dual speed) unpopulated
1 x Serial (console port) and 1 x 10/100BASE-T out-of-band management port
1 x Redundant Power Supply connec

X440-G2-24t-10GE4
I am having a similar issue with 440s. The same GBIC will work in a 440-P but not in a 440-T
Userlevel 2
On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

Yes, is this model, but i can use this port for stack without license. If i connect the same gbic(10g) in any other model, the gbic is recognized.. If i put the other gbic (1g), is recognized in the same port of x440-g2
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

Have you configured them as alternate stacking ports?

Procedure
    Confirm all switches are running same software version on the same partition. show version Confirm license level are the same on all switches. show license Configure stacking-support on all switches. Note, a reboot is required for the changes to take effect. configure stacking-support stack-port all selection alternate Connect all stacking cables. Type show stacking command and confirm all nodes are seen in stack topology. If not seen, type show stacking detail confirm all stack nodes are using the same stacking protocol (ie. standard or enhanced). Change stacking protocol on stack nodes if needed. configure stacking protocol enhanced /standard Type configure stacking easy-setup from the console of the switch we would like to take mastership role. Once rebooted issue show stacking and confirm all nodes take a stacking role.
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

X460-24t/x/p Alternate Stacking
Alternate Stack Port 1 = S1 (29)
Alternate Stack Port 2 = S2 (30)
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

Make sure you are using ports 29/30 for alternate stacking ports.
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

Yes.. I understand, but the problem is .. the switch x440 don´t recognize this gbic

debug hal show optic-info slot 1 port 27
Port 27SFP or SFP+: SFP+
Signal: not present
TX Fault: no
SFP/SFP+ Vendor: M???k
SFP/SFP+ Part Number: S+▼5?LC??
SFP/SFP+ Serial Number: ???8?570156▼
SFP/SFP+ Manufacture Date: 1_72
SFP/SFP+ Type: SFP/SFP+
Connector: LC
Type: SR
Supported: no
Wavelength: 895

the information about gbic its wrong..
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

Can you send the output of
"show stacking stack-ports" and "sho licenses"
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

Slot-2 Stack.1 # show stacking stack-portsStack Topology is a Daisy-Chain
Slot Port Select Node MAC Address Port State Flags Speed
---- ---- ------ ----------------- ----------- ----- -----
*2 1 27 00:04:96:9b:61:9c Link Down -- 10G
*2 2 28 00:04:96:9b:61:9c Link Down -- 10G
* - Indicates this node

Slot-2 Stack.2 # show licensesEnabled License Level:
Edge
Enabled Feature Packs:
None
Effective License Level:
Edge
Slot-2 Stack.3 #
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

Slot-2 Stack.4 # show stacking-support
Stack Available Ports
Port Native Alternate Configured Current
----- ----------------- ---------- ----------
1 No 27 * Alternate Alternate
2 No 28 * Alternate Alternate
stacking-support: Enabled Enabled

Flags: * - Current stack port selection
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

Is not not recognized on either port?
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

You may want to run a Diagnostic on the hardware. This will require the switch to reboot and be taken out of service.

To run diagnostics on Summit family switches, use the following command:
run diagnostics [extended | normal | stack-port]

Where the following is true:
● extended —Reboots the switch and performs extensive ASIC, ASIC-memory, and packet loopback tests. Extended diagnostic tests take a maximum of 5 minutes. The CPU is not tested.
● normal —Reboots the switch and performs a simple ASIC and packet loopback
● stack-port —Performs a BERT on the stacking ports and reboots the switch.

On Summit family switches, you run the diagnostic routine on the switch or on the stacking ports.Running the switch or stacking port diagnostic routine affects system operation; the switch is
unavailable during the diagnostic test.
Userlevel 2
Stachal wrote:

On the X440 G2s 10G is enabled by license can you verify the license is installed?

X440-G2-24t-10GE4

12 x 10/100/1000BASE-T (RJ-45)
4 x 1GBASE-X SFP (unpopulated front-panel ports) upgradeable to 10Gb Ethernet via licensing
1 x Serial (console port RJ-45) with RTS/CTS modem control
1 x 10/100/1000BASE-T out-of-band management port
Coaxial Barrel Connector RPS port

No.. any port is the same error, on others models recognize, gbics (1g) recognize.. i don´t have other x440g2, only x450g2 or x440..
Userlevel 3
You are missing the 10g port licenses. You buy them for 2 or 4 ports. You only need them for Data usage - when you use them for stacking, they are running on 10g without license.
Userlevel 2
cbuchenau wrote:

You are missing the 10g port licenses. You buy them for 2 or 4 ports. You only need them for Data usage - when you use them for stacking, they are running on 10g without license.

Hi .. I need the gbics only for stack.. then don´t need license.. I will upgrade firmware again and test
Userlevel 7
Carsten is correct.
Userlevel 4
Hello Luis,

The issue you have faced is documented under CR xos0064983, please check next article - https://gtacknowledge.extremenetworks.com/articles/Solution/Optics-information-are-not-displayed-pro...

I've seen the issue with both SFP and SFP+ optic modules, issue will be fixed with EXOS release 22.3

Best Regards,
Nikolay
Hi Nikolay,

Thanks for confirming that CR xos0064983 will be addressed in EXOS 22.3. I'm really looking forward to this issue being fixed for the X620.

Paul

Reply