Question

X670v with 10/100/1000 baseT sfp. Port is not active.


Port 6 of the Extreme x670V is connected (CAT 6) to 1G port on a SilMech server through a 10/100/1000 BaseT sfp. The server has link lights but the router does not. The router's port is config to the correct vlan and is enabled and ready. I also tried just connecting the router's port to a fluke. Is there any special configuration needed on the router for this to work?

Image : ExtremeXOS version 15.1.2.12 v1512b12 by release-manager
on Fri Apr 20 20:24:20 EDT 2012
BootROM : 2.0.2.1
Diagnostics : 5.6

Any help would be appreciated.

4 replies

Userlevel 4
I belive the minimum software version could be EXOS 15.2.1 for X670V. Please confirm it by clicking below link,

http://extrcdn.extremenetworks.com/wp-content/uploads/2014/05/ExtremeXOS-Hardware-Software-Compatibi...
Use Extreme Certified SFP.
Thanks for your reply. I'll investigate your link.

SFP 10/1000/1000BASE-T is "Extreme Networks Certified" Part Number: FCLF8522P2BTL-EX

Thx,

Ron
Userlevel 4

Thx for your help... I upgraded. Its working now.

Reply