I bought 2 summit switches model x440-48T from an auction for the Dojo course Campus Exos.
On inspection it became clear both are password protected.
Resetting from boot rom is impossible as boot rom version 18.104.22.168 is installed and does not have the command > config none
I don’t have access to the support portal
Anybody can help me with a boot rom 22.214.171.124 or higher and an exos image to tftp load it on the switches.
A howto mentions a rescue image to be loaded as the first stage for recovery. Is that needed ?
boot rom > show image gives me 1) Exos Image 2) Exos Image 3) Exos Diagnostics 4) Exos Diagnostics
boot2 loads exos 15.x and is also password protected.
thanks in advance